Musterdepot aufnahme - 200% Chance mit Kupferaktie

Duluth wurde gestern von profitetrader.com ins Musterdepot aufgenommen.

http://www.ariva.de/200_Chance_mit_Kupferaktie_c3146606

Den ganzen Bericht gibt es hier:

http://www.profitetrader.com/community/weblog/...epotkauf-200-chance/

Duluth hat bereits eine wirtschaftliche Machbarkeitsstudie für eine Kupfer-Nickel Mine auf Nokomis erstellt.

Scheint in meinen Augen ein wirklich spannendes Projet zu sein.

 

 

das Ding wird richtig explodieren!!!  

Einfach schön...es wird richtig gewaltig nach oben krachen! :-)

http://www.stockwatch.com/Quote/Detail.aspx?symbol=DM&region=C  

Volumen 645k...es baut sich etwas auf! ;-))

Über 4$ sehe ich bald die Aktien...


Tip: CNL.t ( Continental Gold) anschauen und mitmachen :-)  

die Aktie steigt, steigt und steigt...:-)

Tip: Kauf lieber in Kanada....

http://www.comdirect.de/inf/aktien/detail/...tml?ID_NOTATION=17637223  

September 23, 2010
Duluth Metals Announces Ongoing Drill Results on Twin Metals Nokomis Joint Venture

--------------------------------------------------

 TORONTO, Ontario, September 23, 2010 -- Duluth Metals Limited ("Duluth Metals") (TSX: DM) (TSX:DM.U) today announced assay results for eight holes drilled for Twin Metals Minnesota LLC, on the Nokomis joint venture project. Seven holes were drilled in or near the Central Area higher grade zone of the Nokomis Deposit. Highlights include MEX-179 which returned 90 feet of 0.693% copper, 0.192% nickel, 2.8 g/t silver and 1.123 grams per tonne (g/t) Total Precious Metals (TPM = Platinum+Palladium+Gold) (Cu Equivalent* of 1.71%), including a 60 foot section of 0.814% copper, 0.235% nickel, 3.2 g/t silver and 1.376 g/t TPM (Cu Equivalent* of 2.06%), as well as a 30 foot section of 1.019% copper, 0.298% nickel, 3.9 g/t silver and 1.805 g/t TPM (Cu Equivalent* of 2.62%).

Some of the other higher grade intersections are as follows: MEX-180 intersected 50 feet of 0.929% copper, 0.263% nickel, 2.5 g/t silver and 1.856 g/t TPM (Cu Equivalent* of 2.45%) including a 40 foot section of 0.979% copper,0.277% nickel, 2.7 g/t silver and 1.981 g/t TPM (Cu Equivalent* of 2.58%); MEX-174 intersected 60 feet of 0.657% copper, 0.213% nickel, 2.3 g/t silver and 1.199 g/t TPM (Cu Equivalent* of 1.77%) including a 40 foot section of 0.804% copper, 0.265% nickel, 2.9 g/t silver and 1.485 g/t TPM (Cu Equivalent* of 2.18%) and, including a 15 foot section of 1.091% copper, 0.369% nickel, 3.4 g/t silver and 2.107 g/t TPM (Cu Equivalent* of 3.03%); and MEX-178 intersected 20.0 feet of 0.971% copper, 0.235% nickel, 3.3 g/t silver and 2.708 g/t TPM (Cu Equivalent* of 2.59%) within a 65.0 foot section of 0.707% copper, 0.175% nickel, 2.4 g/t silver and 1.420 g/t TPM (Cu Equivalent* of 1.78%), all within a 165.0 foot section of 0.619% copper, 0.135% nickel, 2.7 g/t silver and 0.929 g/t TPM (Cu Equivalent* of 1.39%).

Vern Baker, President of Duluth Metals, stated: "Diamond drilling was focused mainly in the Central Area of the Nokomis Deposit. Drill results continue to show the potential for significant areas of higher grade within the deposit. This information will be incorporated into the upcoming prefeasibility work being done by Twin Metals Minnesota on the Nokomis Project. These results also provide confidence that Twin Metals Minnesota will be able to evaluate higher grade areas for incorporation into a mine plan that could improve the project's economics."

A map illustrating the location of the eight drill holes reported in this press release can be found on the Company website under this press release at www.duluthmetals.com.



Click to enlarge

A more detailed summary of the assay results for MEX-174, 175, 176, 177, 178, 179, 180 and 181 can be found in the table below. True width is estimated at about 90% of core length.

HOLE ZONE FROM (feet) TO     (feet) LENGTH (feet) COPPER (%) NICKEL (%) TPM*   (g/t) CuEQ   (%)
MEX-174 Total Mineralized Interval 3563 3828 265 0.491 0.128 0.646 1.13
 @0.3% Cu cut-off 3563 3623 60 0.657 0.213 1.199 1.77
 @0.5% Cu cut-off 3568 3608 40 0.804 0.265 1.485 2.18
 including 3573 3588 15 1.091 0.369 2.107 3.03
 @0.3% Cu cut-off 3648 3828 180 0.483 0.109 0.529 1.02
 @0.5% Cu cut-off 3738 3758 20 0.767 0.160 0.721 1.53
 @0.5% Cu cut-off 3788 3818 30 0.737 0.126 0.833 1.44
                 
MEX-175 @0.3% Cu cut-off 3843 3883 40 0.477 0.134 0.857 1.21
 @0.5% Cu cut-off 3853 3868 15 0.682 0.164 1.383 1.70
 @0.3% Cu cut-off 3903 3943 40 0.426 0.107 0.489 0.94
                 
MEX-176 @0.3% Cu cut-off 3343 3488 145 0.638 0.164 0.840 1.47
 @0.5% Cu cut-off 3343 3448 105 0.695 0.185 0.962 1.64
                 
MEX-177 Total Mineralized Interval 3828 3918 90 0.412 0.065 0.415 0.77
 @0.5% Cu cut-off 4043 4053 10 1.223 0.151 2.272 2.60
                 
MEX-178 Total Mineralized Interval 3573 3738 165 0.619 0.135 0.929 1.39
 @0.3% Cu cut-off 3573 3638 65 0.707 0.175 1.420 1.78
 @0.5% Cu cut-off 3598 3638 40 0.803 0.196 1.883 2.10
 including 3613 3633 20 0.971 0.235 2.708 2.59
 @0.5% Cu cut-off 3658 3713 55 0.768 0.147 0.823 1.54
 including 3683 3693 10 1.143 0.204 1.559 2.40
                 
MEX-179 @0.3% Cu cut-off 3838 3928 90 0.693 0.192 1.123 1.71
 @0.5% Cu cut-off 3838 3898 60 0.814 0.235 1.376 2.06
 including 3838 3868 30 1.019 0.298 1.805 2.62
 @0.3% Cu cut-off 3958 3978 20 0.569 0.062 0.343 0.89
                 
MEX-180 @0.3% Cu cut-off 4019 4104 85 0.701 0.196 1.323 1.81
 @0.5% Cu cut-off 4024 4074 50 0.929 0.263 1.856 2.45
 including 4034 4074 40 0.979 0.277 1.981 2.58
 @0.5% Cu cut-off 4204 4229 25 0.576 0.074 0.461 0.98
                 
MEX-181 Total Mineralized Interval 4128 4228 100 0.360 0.064 0.418 0.72
 @0.5% Cu cut-off 4153 4163 10 0.827 0.122 0.961 1.58

Complete gold, platinum, palladium and silver assays for MEX-174, 175, 176, 177, 178, 179, 180 and 181 are as follows:

HOLE ZONE FROM (feet) TO (feet) LENGTH (feet) GOLD (g/t) PLATINUM (g/t)  PALLADIUM (g/t) SILVER (g/t)
MEX-174 Total Mineralized Interval 3563 3828 265 0.086 0.169 0.391 1.7
 @0.3% Cu cut-off 3563 3623 60 0.152 0.310 0.738 2.3
 @0.5% Cu cut-off 3568 3608 40 0.187 0.389 0.910 2.9
 including 3573 3588 15 0.241 0.558 1.308 3.4
 @0.3% Cu cut-off 3648 3828 180 0.073 0.141 0.316 1.7
 @0.5% Cu cut-off 3738 3758 20 0.102 0.187 0.432 2.9
 @0.5% Cu cut-off 3788 3818 30 0.127 0.212 0.495 2.9
                 
MEX-175 @0.3% Cu cut-off 3843 3883 40 0.097 0.215 0.546 1.5
 @0.5% Cu cut-off 3853 3868 15 0.163 0.340 0.880 2.1
 @0.3% Cu cut-off 3903 3943 40 0.060 0.124 0.305 1.4
                 
MEX-176 @0.3% Cu cut-off 3343 3488 145 0.106 0.239 0.496 2.3
 @0.5% Cu cut-off 3343 3448 105 0.119 0.276 0.567 2.5
                 
MEX-177 Total Mineralized Interval 3828 3918 90 0.066 0.104 0.244 1.8
 @0.5% Cu cut-off 4043 4053 10 0.282 0.670 1.321 8.4
                 
MEX-178 Total Mineralized Interval 3573 3738 165 0.084 0.244 0.601 2.7
 @0.3% Cu cut-off 3573 3638 65 0.092 0.359 0.969 2.4
 @0.5% Cu cut-off 3598 3638 40 0.102 0.466 1.314 2.7
 including 3613 3633 20 0.125 0.475 2.108 3.3
 @0.5% Cu cut-off 3658 3713 55 0.104 0.229 0.490 3.5
 including 3683 3693 10 0.187 0.484 0.889 5.3
                 
MEX-179 @0.3% Cu cut-off 3838 3928 90 0.169 0.289 0.666 2.8
 @0.5% Cu cut-off 3838 3898 60 0.206 0.351 0.819 3.2
 including 3838 3868 30 0.282 0.459 1.064 3.9
 @0.3% Cu cut-off 3958 3978 20 0.057 0.083 0.204 2.3
                 
MEX-180 @0.3% Cu cut-off 4019 4104 85 0.191 0.346 0.787 1.8
 @0.5% Cu cut-off 4024 4074 50 0.278 0.483 1.095 2.5
 including 4034 4074 40 0.309 0.511 1.160 2.7
 @0.5% Cu cut-off 4204 4229 25 0.074 0.111 0.276 3.5
                 
MEX-181 Total Mineralized Interval 4128 4228 100 0.064 0.108 0.246 1.8
 @0.5% Cu cut-off 4153 4163 10 0.133 0.267 0.562 6.2

For the 2010 Drill Program, half core samples are being prepared at ALS Chemex Ltd. laboratories in Thunder Bay and then shipped to its analytical facilities in Vancouver. Samples are being analyzed for Au, Pt, and Pd using a standard fire assay with an ICP finish and for 27 other elements using a four acid (near total) digestion and a combination of ICPMS and ICPAES. ICP over limits were re-analyzed using sodium peroxide fusion, acid dissolution followed by ICPAES. The remaining half core samples are being stored in Minnesota.

*Note - Copper Equivalent is based on US metal prices of: Copper - $1.75/lb, Nickel - $7.00/lb, Cobalt - $10.00/lb, Gold - $600/oz, Platinum - $1,100/oz, Palladium - $350/oz and Silver - $8.50/oz, and the methodology with metallurgical recoveries, refining costs and other charges being considered for all metals in accordance with the Net Smelter Return Factors contained in the January 22, 2008, NI 43-101 Scoping Study produced by Scott Wilson RPA.

David Oliver, P. Geo. and Duluth Project Manager is the Qualified Person, in accordance with NI 43-101 of the Canadian Securities Administrators, and is responsible for the technical content of this press release and quality assurance of the exploration data and analytical results.

About Duluth Metals
Duluth Metals is committed to acquiring, exploring and developing copper, nickel and platinum group metal (PGM) deposits. The Company has a joint venture with Antofagasta plc on their principal asset called the Nokomis Project, located within the rapidly emerging Duluth Complex mining camp in northeastern Minnesota. The Duluth Complex hosts one of the world's largest undeveloped repositories of copper, nickel and PGMs, including the world's third largest accumulation of nickel sulphides, and one of the world's largest accumulations of polymetallic copper and platinum group metals. Aside from the joint venture, the Company retains a 100% position on approximately 31,000 acres of mineral interests on exploration properties adjacent to and nearby the joint venture Nokomis Deposit.

About Twin Metals Minnesota LLC
Twin Metals Minnesota LLC is a new joint venture company, which is 60% owned by Duluth Metals and 40% by Antofagasta plc. The joint venture's principal asset is called the Nokomis Project, located within the Duluth Complex mining camp in northeastern Minnesota. The current NI 43-101 compliant Resource Estimate dated December 2009 for the Nokomis Deposit consists of 550 million tonnes of Indicated Resources grading 0.639% copper, 0.200% nickel, 0.660 grams per tonne TPM (TPM = Pt + Pd + Au) for a copper equivalent (CuEq) grade of 1.51%, plus an additional 274 million tonnes of Inferred Resources grading 0.632% copper, 0.207% nickel, 0.685 grams per tonne TPM for a CuEq grade of 1.53%.  

die 3 CAD$ Marke wird in Angriff genommen...  

Wir haben bald die 4 $ Marke erreicht!  

es steigt, steigt und steigt!  Gestern legte die Aktie schon wieder mehr als drei Prozent zu. Schlußkurs 2,99$

http://www.stockwatch.com/Quote/Detail.aspx?symbol=DM&region=C

 

 

Schön für euch, schade für mich, dass ich nicht dabei war.
2009 mit 2000 Euro rein und jetzt mit 2000% bzw. einem Porsche Cayenne wieder raus. Das wäre schöööön gewesen. Aber ich gebe nicht auf :-)

Guten Rutsch!  

Toll, wie sich Duluth entwickelt hat.
Gratulation an alle Investierten!
Beobachte Duluth weiterhin...  

Gibts die Firma überhaupt noch?  Warum schreibt hier keiner mehr seit Ende 2012?

 

 

Lest Mal die News aus der letzten Zeit! Hat hier niemand mehr Interesse an  einem Austausch?  

http://markets.ft.com/research/Markets/Tearsheets/Forecasts?s=DM:TOR

Nur zur Info - ist keine Empfehlung zum Kauf oder Verkauf!  

http://tmx.quotemedia.com/quote.php?qm_symbol=DM  

http://barchart.com/opinions/stocks/DM.TO  

Die Analysen aus 30 Bohrlöchern scheinen an den kanadischen Börsen aufs erste keine Begeisterung ausgelöst zu haben.

Für Ende November ist die Veröffentlichung endgültiger Zahlen der pre-feasibility AMEC Ressourcenschätzung angekündigt; Ergebnisse aus weiteren 159 Bohrlöchern sollen darin eingearbeitet werden. Es ist dann also mit deutlich "mehr Metall" in der Ressource bzw. mit einer Hochstufung der Vorräte innerhalb der Ressourcenkategorien zu rechnen.

Smy


Auszüge aus der News:

TORONTO, Ontario, November 9, 2012 - Duluth Metals Limited ("Duluth Metals") (TSX: DM) (TSX: DM.U) is pleased to announce assay results for 30 additional holes, MEX-379 to 408, on the Maturi Deposit within the Twin Metals Minnesota Project in northeastern Minnesota. The majority of the holes have significant length intercepts that meet a 0.5% Cu cut-off criteria. These holes, distributed across the Maturi Resource, continue to indicate the ability to define a higher grade sub-set of the resource for early utilization. These additional holes will be incorporated into the final resource estimate to be issued by AMEC later this month (November 2012).


In Area 1 (shallow west Maturi):

   Mex-400 returned a 136 foot intersection of 0.945% copper, 0.256% nickel, 3.2 g/t silver and 0.638 grams TPM (TPM = Platinum+Palladium+Gold) at a 0.5% Cu cut-off.
   Mex-390 returned a 189 foot intersection of 0.829% copper, 0.253% nickel, 2.4 g/t silver and 0.519 grams TPM at a 0.5% Cu cut-off.


In Area 2 (deeper west Maturi):

   Mex-399 returned a 172.5 foot intersection of 0.793% copper, 0.280% nickel, 2.6 g/t silver and 0.578 grams TPM at a 0.5% Cu cut-off.
   Mex-388 returned a 115.5 foot intersection of 0.653% copper, 0.259% nickel, 3.0 g/t silver and 0.719 grams TPM at a 0.5% Cu cut-off.


In Area 3 (central Maturi):

   Mex-381 returned a 125 foot intersection of 0.866% copper, 0.266% nickel, 2.8 g/t silver and 0.661 grams TPM (TPM = Platinum+Palladium+Gold) at a 0.5% Cu cut-off.
   Mex-391 returned a 148.5 foot intersection of 0.853% copper, 0.269% nickel, 3.3 g/t silver and 0.882 grams TPM at a 0.5% Cu cut-off.


The Twin Metals Minnesota Project covers over 32,000 acres of land/mineral interests and consolidates the largest base and precious metal land position in Minnesota. This extensive land position provides Twin Metals with the platform to plan and develop one the world's largest copper-nickel-PGM deposits within a new emerging mining belt in Minnesota, USA.

Duluth Metals Limited is committed to acquiring, exploring and developing copper, nickel and platinum group metal (PGM) deposits. Duluth Metals has a joint venture with Antofagasta plc on the Twin Metals Minnesota Project, located within the rapidly emerging Duluth Complex mining camp in north-eastern Minnesota. The Duluth Complex hosts one of the world's largest undeveloped repositories of copper, nickel and PGMs, including the world's third largest accumulation of nickel sulphides, and one of the world's largest accumulations of polymetallic copper and platinum group metals. Aside from the joint venture, Duluth Metals retains a 100% position on approximately 40,000 acres of mineral interests on exploration properties adjacent to and nearby the Twin Metals Minnesota LLC joint venture.

About Twin Metals Minnesota LLC

Twin Metals Minnesota, LLC, is a joint venture company, 60 percent owned by Duluth Metals Limited and 40 percent by Antofagasta plc. Twin Metals was formed in 2010 to pursue the development and operation of a copper, nickel and platinum group metals (strategic metals) underground mining project within the Duluth Complex in northeastern Minnesota. Twin Metals holds mineral and land assets of approximately 32,000 acres of leased and permitted land, including mineral resources prepared in compliance with the requirements of NI 43-101.

Links:
http://www.ariva.de/news/...the-Twin-Metals-Minnesota-Project-4335264

News als pdf (mit Karte): http://www.duluthmetals.com/i/pdf/2012-11-09_NR.pdf  

Homepage: http://www.duluthmetals.com/  

Und zwar auf 100% DM-Gebiet, nicht auf dem JV!

http://www.ariva.de/news/...ill-Rig-on-Exploration-Properties-4356142  

http://www.ariva.de/news/...ls-Minnesota-s-Birch-Lake-Deposit-4358282  

Contained metals in the new resources are shown in Table 2:

Table 2 - CONTAINED METALS IN THE TMM RESOURCE*

METAL       INDICATED RESOURCE         INFERRED RESOURCE
Copper     13.7 Billion lbs.                 11.8 Billion lbs.
Nickel         4.4 Billion lbs.                   4.0 Billion lbs.
                                        §
  Platinum§  5.6 Million ozs.                   3.5 Million ozs.**
 Palladium§12.6 Million ozs.                  7.6 Million ozs.**
      Gold§       3.0 Million ozs.                  1.7 Million ozs.**
                              §
* Note - Based on mineral resources estimated at base case 0.3% copper cut-off grade.
** Note - Contained ounces of platinum, palladium, and gold in the Inferred category do not include the Spruce Road deposit.


http://www.finanznachrichten.de/...rade-and-indicated-tonnage-008.htm



Ein interessanter Aspekt für Cashflow und IRR einer möglichen Mine ist die unter Subunit 3 ausgewiesene Ressourcenschätzung für Maturi bei 0,5% Cu cut-off:

"The current Maturi Deposit resource estimate is based on a refined geological model. One geological subunit within the Maturi Deposit, known as the S3, hosts a higher-grade area that is a subset of the base case mineral resource estimate that may have potential as an early start-up area. AMEC estimated that the S3 Subunit in the Maturi Deposit, using a 0.5% Cu cut-off, contains 622 million tons grading 0.69% Cu, 0.22% Ni and 0.76 ppm TPM of Indicated Mineral Resources and 198 million tons grading 0.65% Cu, 0.21% Ni and 0.82 ppm TPM in the Inferred category. This material is a higher grade sub-set of the global resources estimated for Maturi. Within the Maturi Deposit, the bulk of mineralization is hosted by two subunits of the Basal Mineralized Zone (BMZ). The S2 and S3 subunits are stratiform, with the S3 subunit overlying the S2 subunit. Both subunits are laterally extensive, and are present over the vast majority of the deposit footprint. Within the Indicated Mineral Resource areal footprint, the S3 subunit ranges in vertical thickness from 0 to 355 feet, averaging 108 feet thick (0 to 276 feet, average 91 feet true thickness) and within the Indicated Mineral Resource areal footprint, the S2 subunit ranges in vertical thickness from 0 to 423 feet, averaging 72 feet thick (0 to 329 feet, averaging 59 feet true thickness). ..."

Dazu ein Artikel zum Kupfer-Bergbau:
http://aheadoftheherd.com/Newsletter/2012/...duction-Under-Stress.htm

Ich bin Mal gespannt, welche Ergebnisse die neuen Bohrungen auf 100% DM-Gebiet erbringen werden!

Smy  

Auszug:

Duluth Metals wishes to clarify the statement made with respect to the Inferred Mineral Resource of 1.26 billion tons on the Birch Lake, Maturi and Spruce Road deposits as representing "a 9% increase in Inferred Tons" from the June 2012 interim AMEC Report.  While the Indicated Mineral Resource Tons did indeed increase by approximately 60%, the statement with respect to Inferred Tons should have read "an 8% decrease in Inferred Tons from the June 2012 interim report".

http://www.ariva.de/news/...Metal-Grade-and-Indicated-Tonnage-4369144  

http://www.mineweb.com/mineweb/content/en/...oid=165764&sn=Detail  

http://www.duluthnewstribune.com/event/article/id/251972/group/News/

http://m.startribune.com/news/?id=175679211  

Nach meinen Nachforschungen liegen die wenigen zuletzt umstrittenen Konzessionsgebiete etwa 6-9 Meilen nordwestlich von Silver Bay in Lake County. Damit sind die spannenden aktuellen Bohrungen nicht von dem Disput betroffen.

Auf der Homepage steht eine aktualisierte Investor Presentation (Jan.2013) zum Download. Darin werden die Ziele der laufenden Exploration präzisiert (v.a. S.7 und S.20):

http://www.duluthmetals.com/i/pdf/presentation.pdf

Smy